Fully Functional Goat Wagon Close-Ups/Specifications
Fully Functional Goat Wagon Close-Ups/Specifications
There is a bottom brace on this Goat Wagon, like this brace, to provide added strength for pulling.
COLOR SAMPLES
Rustic Brown: The is the color depicted in the first picture at the top of the page.
Black: Cream White:
Unfinished:
()
This fully functional Goat Wagon, with slats on all sides, shalve, reins & harness, bottom brace, wheel bushings, is meant for 1 small animal, such as a goat, small pony, or large dog.
(SHIPS IN 2 LARGE PACKAGES)
4 colors that this wagon comes in, "Rustic Brown", "Lacquer Paint Black", & "Lacquer Paint Cream White" are depicted at the bottom of this page.
Large Goat Wagon
Inside Measurments
( Inisde bottom approx. = 14" side to side, x 31.5" front to back. Inside
top = Approx. 24" at the top x 31.5" long at the top. The rails are 16" high.)
Outside Measurements
Approx. 28"H - (from ground to top of wagon), x 31.5"W x 42"L - (front
edge of front wheel to back of back edge of back wheel. The tongueis
an additional 36". (Total outside = approx. 78".)
These wagons are functional.
The weight capacity is 450 lbs. This wagon has 15" wheelsin the front
and 19" wheels in the rear.
This shot, just below, shows a "regular" tongue on the large goat wagon. The Shalve and harness setup to the left bolts onto where the regular tongue is bolted on to. This allows for an animal to pull it.
All Material, and Pictures on this site
Copyright
© R & P Trading.
All Rights Reserved
